-
-
ꁇHome Decoration Main Materials
-
ꁇCommercial Decoration Main Materials
-
ꁇGeneral Auxiliary Materials
-
ꁇHardware & Fittings
-
ꁇLighting & Electrical
-
ꁇDoors & Windows
-
ꁇSoft Decoration & Home Products
-
ꁇTools & Equipment
-
ꁇSpecial Engineering Materials
-
ꁇCustomer Service
-
ꁇSpecial Zones
-
Half Overlay Soft-Close Cabinet Hinge for Frameless Wardrobe Doors
Product Family Half Overlay Soft-Close Cabinet Hinge
Material / Finish Metal hinge construction shown; stainless grade and advertised thickness require confirmation.
Structure / Function Concealed cup hinge with a half-overlay crank arm and advertised damping. Supports a cabinet door pivot and is marketed with a soft-close action; damping behavior TBC.
Installation Cup-bore installation with a cabinet-side mounting plate; confirm the shared-partition clearance.
Half Overlay Soft-Close Cabinet Hinge for Frameless Wardrobe Doors
This product page presents half overlay soft-close cabinet hinge for frameless wardrobe doors. It is intended for frameless wardrobes, kitchen cabinets and furniture where two doors meet at a shared partition. The selected product family is distinguished by its structure, function and installation interface. Confirm the exact SKU and dimensioned drawing before publication or order placement.
Key Features
· Concealed cup hinge with a half-overlay crank arm and advertised damping.
· Supports a cabinet door pivot and is marketed with a soft-close action; damping behavior TBC.
· Mounting method: Cup-bore installation with a cabinet-side mounting plate; confirm the shared-partition clearance.
· Product family: Half Overlay Soft-Close Cabinet Hinge. Select by structure, function and installation interface.
· Page options: Cup bore, arm geometry, finish and damping version, if available for the selected SKU.
· Exact SKU, dimensions, materials and any performance evidence require supplier confirmation.
Applications
· Frameless wardrobes, kitchen cabinets and furniture where two doors meet at a shared partition.
· New furniture manufacture using a compatible panel, frame and fixing layout.
· Replacement or fit-out projects after the mating dimensions and installation method are checked.
· Commercial or residential interiors that match the product family and supplier installation guidance.
Specifications
|
Product Model |
FHN-02 |
|
Product Family |
Half Overlay Soft-Close Cabinet Hinge |
|
Material / Finish |
Metal hinge construction shown; stainless grade and advertised thickness require confirmation. |
|
Structure / Function |
Concealed cup hinge with a half-overlay crank arm and advertised damping. Supports a cabinet door pivot and is marketed with a soft-close action; damping behavior TBC. |
|
Installation |
Cup-bore installation with a cabinet-side mounting plate; confirm the shared-partition clearance. |
|
Application |
Frameless wardrobes, kitchen cabinets and furniture where two doors meet at a shared partition. |
|
Supplier Confirmation |
Cup and plate dimensions, partition thickness, overlay, drilling pattern, hinge count and damping behavior. |
Available Sizes / Colors / Finishes
|
Available Sizes |
Cup bore, half-overlay geometry, door thickness and drilling pattern: supplier drawing required. |
|
Colors / Finishes |
Confirm available colors and finishes for the exact SKU; standard choices should remain variants of this product page. |
Product Family Comparison
|
Attribute |
Selected Family |
Related Family 1 |
Related Family 2 |
|
Product Type |
Half-Overlay Cup Hinge |
Full-Overlay Cup Hinge |
Wide-Angle Cup Hinge |
|
Construction |
Half-overlay cup arm |
Full-overlay cup arm |
Wide-angle multi-link |
|
Mounting |
Cup bore |
Cup bore |
Cup bore |
|
Typical Use |
Shared-partition doors |
Full-overlay doors |
Wide-clearance doors |
Installation
· Mounting: Cup-bore installation with a cabinet-side mounting plate; confirm the shared-partition clearance. Confirm the supporting panel, frame or wall substrate and use the supplier's installation drawing.
· Fit check: Cup and plate dimensions, partition thickness, overlay, drilling pattern, hinge count and damping behavior.
· Before volume production, verify a sample against the mating furniture part. Confirm the included fasteners, set quantity and installation orientation in writing.
Packaging & Shipping
|
Packing |
Carton dimensions, gross weight, protective packing and set quantity: supplier confirmation required before freight quotation. |
Customization Options
Cup bore, arm geometry, finish and damping version, if available for the selected SKU. Ask the supplier to confirm carton dimensions, gross weight, protective packing and the available export pack quantity before freight quotation.
Quality and Compliance
· The product image and public listing do not establish product-specific certificates, test reports, alloy composition or performance ratings. Request documentation for the exact SKU and destination before making a compliance claim.
· Check the buyer's project and destination requirements for the selected hardware. No load rating, corrosion rating, fire-door approval or other project certification is represented unless supported by supplier evidence.
FAQ
What information is needed for a quotation?
Send model FHN-02, a dimensioned drawing, the mating panel or frame details, mounting pattern, finish, quantity, destination and packing requirements. Include a sample when fit is critical.
Will this product fit my furniture?
Compatibility depends on the mating dimensions and installation interface. Confirm these details: Cup and plate dimensions, partition thickness, overlay, drilling pattern, hinge count and damping behavior. A sample fit check is recommended before a volume order.
What is included, and what documents are available?
Ask the supplier to confirm the exact SKU, set quantity, included fasteners, carton data, material evidence and any destination-relevant test reports. The product image alone does not establish these details.
Request a Product Quotation
Send the model code, dimensioned drawing, required quantity, destination and packing requirements to request a written quotation and sample confirmation.
-
uPVC Solvent-Socket Union for Demountable Water-Pipe Joints
Product Model UN-008
Product Type Pipe union
Material and Structure uPVC; exact compound to confirm; Plastic union nut and socket ends
Connection / Installation Solvent-cement pipe ends; union nut for service access
Size / Connection Options Supplier sizes and tolerances to confirm. Nominal diameter, seal and thread form
Performance / Compliance Exact SKU ratings, standards and reports require supplier confirmation.$ 0.00Buy now
-
Stainless Steel SMS Sanitary Union for Process-Pipe Connections
Product Model UN-006
Product Type Pipe union
Material and Structure Stainless steel; exact grade to confirm; Round-nut sanitary union with SMS-style interface per listing
Connection / Installation Matched sanitary connection and gasket
Size / Connection Options Supplier sizes and tolerances to confirm. Tube OD, face/profile, gasket and material grade$ 0.00Buy now
-
PPR Heat-Fusion Union with Brass Threaded Ends
Product Model UN-002
Product Type Pipe union
Material and Structure PPR body with brass ends per listing; Removable union section with threaded metal transition
Connection / Installation Heat-fuse pipe side; threaded equipment side
Size / Connection Options Supplier sizes and tolerances to confirm. Pipe OD, thread pair and seal$ 0.00Buy now
-
PPH Heat-Fusion Union for Industrial Pipe Maintenance
Product Model UN-004
Product Type Pipe union
Material and Structure PPH; exact grade to confirm; Demountable thermoplastic union with union nut
Connection / Installation Socket heat fusion with matched pipe
Size / Connection Options Supplier sizes and tolerances to confirm. Nominal diameter, seat and gasket material$ 0.00Buy now
-
Galvanized Malleable-Iron Threaded Union for Serviceable Pipe Joints
Product Model UN-001
Product Type Pipe union
Material and Structure Malleable iron with galvanized finish; Three-piece union with threaded ends
Connection / Installation Threaded union with gasket/seat to confirm
Size / Connection Options Supplier sizes and tolerances to confirm. Nominal bore, thread standard, seat and coating$ 0.00Buy now
